Shipping.

I have noticed that a lot of people have questions in regards to shipping. The manufacturer is located in New Jersey and will be able to ship via their own fleet of trucks to customers in NJ, and parts of PA, NY, and MD. We will ship the product to any customers located in the US but charges will vary depending on different factors. The cost will be determined by the size of the shipment, the weight, and the distance. When it comes to the shipping charges there is little that can be done to keep the cost down because of these factors. Now remember that the shipping charge can be avoided if the customer would like to pick up the product directly from the manufacturer. That is always an option.

Installation of Posts

Due to recent questions of how to install the posts of our fencing, I decided to type up a guide on how to install our post. I hope this helps all our customers out.

After each post has been positioned and marked, use an auger or post hole digger to dig holes. If using 5 x 5 post use a 12” diameter hole. If using 4 x 4 posts use a 10” diameter hole. Holes should be 36” deep or below the frost line.

Fill the bottom of the hole with 2” of gravel.

Position post with 2” of clearance between the bottom rail and the ground. Fill the hole around the post with concrete up to 2”-4” from the top of the hole.

Level and square off.